THE COBBLE MOUNTAIN CHAIR
HANGING
INSTRUCTIONS
PLEASE
READ AND FOLLOW THESE INSTALLATION INSTRUCTIONS. DO NOT EXCEED THE MAXIMUM LOAD LIMIT OF 240
LB. DO NOT LET SMALL CHILDREN PLAY IN
THE CHAIR UNATTENDED. AFTER
INSTALLATION, PERIODICALLY VERIFY THAT THE SCREW HOOK IS SECURE.
LOCATION: You will
need to satisfy two considerations:
First, a STURDY anchor point
overhead. Nothing less than 2” x 6”
framing lumber should be used. Second,
you’ll need space below for the chair to occupy, an area of approximately 3’ x
5’.
INSTALL
THE HOOK: Using an electric drill with a 5/16” drill
bit VERY CAREFULLY locate the center
of the overhead beam. Drill a hole straight-up (plumb) about 2” deep. Install the hook; be sure to bury all the
threads. DO NOT INSTALL THE HOOK HORIZONTALLY!
HANG
& ADJUST THE CHAIR: Hang the
chair on the hook. To adjust the height
and angle of recline, simply slide the wooden blocks along the harness
ropes. Toss the cushion in and have a
seat. Make further adjustments as
necessary.
CARE
& MAINTENANCE: Spot clean the pillows. Clean the ropes using warm, soapy water and a
soft bristled scrub brush. Rinse
thoroughly and allow to dry completely, preferably in direct sunlight. To spruce up the wood frame, carefully apply
furniture oil using a soft, clean cloth.
DO NOT store your chair where
mice or bugs may be present.
COBBLE MOUNTAIN, INC.
PO Box
Email: info@cobblemountain.com Fax: